On December 8th, Lianxiang strictly shipped the customer orders in a streamlined way.

category：Weekly news
pubtime：2021.12.11
clicks：340

After three days, Lianxiang achieved a streamlined and strict attitude from stocking to loading to testing aging. Implemented the six-character mantra of "persistence, quality and innovation" of corporate culture.normalize

Lianxiang has a set of standard installation procedures and strictly implements them.

Preparation process

1.1 the package shall be disassembled according to the installed quantity, and placed neatly in a spare position (foam pads shall be placed at intervals of each chassis to prevent scratching).

1.2 Prepare the motherboard, memory, CPU and fan, copy the system in advance, brush the customer BIOS, remove the screws with four COM ports, remove the hard disk rack, and affix PVC dust nets on both sides of the chassis. (Note: the bottom of cheetah fan is fixed with iron bars)

Installation process

Install the motherboard and power supply, connect the switch cable, power cable, hard disk power supply cable, SATA cable, chassis fan power supply cable, front USB cable and COM cable one after another, and tie them in a fixed position and glue them (Note: COM screws are used to check whether there is any leakage)

Test flow

Test whether the COM port interface signal is normal, whether the front panel fan is normal, whether the solid state disk is well divided, whether the fan is set to temperature control, whether the LAN port is connected to the Internet normally, whether the microphone and audio receiver can receive sound, and whether the system is active. Copy the machine after everything is normal.Shipping process

Check whether the screws around the machine cover are tightened, wipe the machine body clean, put the product label paper on it, wrap the foam and put it into the outsourcing, put it into the accessory box (with warranty card, power cord and screw bag) and seal the adhesive tape, and put the list or invoice on the outsourcing box. Cover with a layer of protective film, attach several pieces of label paper, and pack and ship.

PREV：LX-B350-C successfully applied for a national appearance patent on May 20, 2020

NEXT：NONE

Solution

About us

Support

About us

News